You may wonder how to fix the E20 error on your washing machine. In order to solve this problem, you must first determine the root cause of the error. If the problem is with the drain hose or standpipe, you can flush it out by using a garden hose. If the clog is more severe, you should seek the help of a plumber. Fortunately, the software to fix your washing machine is available and only takes a couple of minutes to download.
Zanussi washing machines may have problems with the E20 error. To resolve this error, you need to first unplug your washing machine from the mains and all utilities. Then, remove your laundry and drain water into a bucket or bathroom. If the water drains easily, it may be due to a blockage in the pump or sewer pipes. In order to fix this problem, you need to remove your laundry so that technicians can inspect the drainage system.
Once you have located the problem, you can begin the process of repairing your washing machine. If you have the right tools, you can try doing the repair yourself. If you are handy with tools, you can even take photos to help you later. It will help if you take photos along the way. You should also take note of the exact process that you took when assembling the washer. Next, make sure that the drain pump is installed properly. You should test it after installation and operation. You should also check the pressure switch. Lastly, you should check the wires that connect the liquid level sensor to the pump.
If this does not work, you may need to unplug the washing machine. Once you do this, you should check the drain hose. It may be clogged or blocked. If it is plugged, you should try unplugging it. Make sure the drain hose and pump are unobstructed. If the drain hose is blocked, you should clean it. Then, you can go ahead with the other steps that are necessary to fix the problem.
If you still cannot locate the drain hose, you can try removing the drain filter. The drain filter is usually hidden behind a small door on the front panel of the washing machine. Refer to the user manual or chat with a technician. While doing this, place a cloth over the filter so that the water drains out. This method can be repeated many times to clear the clog. It may also resolve the E20 error for you if you have a clogged drain hose.
In case your drain hose is plugged, it is important to empty the water inside your washing machine. If this is not possible, you can use a bucket to drain the water. Make sure the hose is clamped so that no water escapes. If this doesn’t work, you may need to replace the exhaust pump. Make sure you are confident in your ability to do this repair. It might be the only option if your washing machine is not working.