If you’ve had your Xfinity modem blinking green after a reset, it may be time for a factory reset. To do a factory reset, make sure the gateway is plugged in, the POWER light LED is blinking, and the reset button is located in the small hole. You can insert a small pin into the hole and press the reset button.
Xfinity modem blinking green and orange after reset
If your Xfinity modem keeps blinking orange and green after reset, it could be that it has been tampered with. However, there are ways to fix this problem. The first step is to check whether the internet cable is intact. If not, you may need to change the cable. If you cannot, you should contact Xfinity support to resolve the issue.
The second step is to check if there are any loose cables or connections to the modem. If they’re loose, they can cause your modem to blink. You can also try to reconnect to your modem by connecting directly to the ethernet. If this doesn’t work, you may need to move your modem to get a better signal.
If the green and orange lights keep blinking after resetting, the problem may be related to damaged wires or loose cables. If this is the case, you can try to troubleshoot the problem or try a reset. Sometimes, your modem might blink different colors, which means it’s not connected properly.
Another possible cause of the problem is a power interruption. In this case, you need to contact Xfinity support so they can send a technician out to fix the problem. Occasionally, Xfinity modems wear out over time and require repair. To avoid this, you should contact your provider if your power supply is interrupted.
Another possible cause of the problem may be your internet gateway. Check the fiber wires coming to your home. Damaged fiber wires can make your internet connection unstable. If the fiber wires are damaged, you should replace them. If your gateway is still blinking, you should try to check your internet speed.
If none of these measures work, power cycling can be a simple solution to your problem. You can do this manually or via phone. To do this, disconnect the power cord and any connecting wires. The process only takes a minute, and you should be able to reconnect them afterward.
If your Xfinity router continues blinking green and orange after reset, you may be experiencing a firmware update. This firmware update is necessary in order for your Xfinity router to function properly. The router will attempt to connect to the Xfinity servers automatically whenever it receives a new software update. If it fails to connect, you should wait a full minute and try again.