GoWise Air Fryer E1 Error Code

If your air fryer is reporting the E1 error code, you should first check the sensors. If the sensors are not working, it might be an overheating issue. If you are unsure, you can contact the manufacturer or NuWave Brio customer support for help. For GoWISE air fryers, you might be stuck in cleaning mode. To get the air fryer back into cooking mode, you can unplug it from the outlet.

Overheating air fryer

If your GoWISE air fryer is showing an E1 overheating error code, you may have a broken sensor. If the sensor is not working, you may need to replace the thermal fuse in your fryer. Once you have replaced the thermal fuse, you may need to wait at least ten minutes before using the air fryer again. Make sure the air fryer is cool before checking for an E1 overheating error code.

The power cord of your air fryer may be damaged. If it is, contact the manufacturer or the store where you bought it. If the problem persists, contact the manufacturer of the air fryer for assistance. In some cases, a new PCB can be purchased online. Another possible solution is to store your air fryer in a cooler place. Unplugging it will help it get to a normal temperature. After 20 seconds, it will shut down.

If the error persists, you may need to replace the power cord. Some air fryers have a built-in fuse, and replacing it may fix the problem. For more information, check out the Wikihow article below. You may need to replace the air fryer’s fuse, so it’s essential to first check the power cord’s safety switch. Alternatively, it may be blown or you may be using the wrong basket.

Broken circuit

If your GoWISE air fryer displays an error code E1, it means that the thermal sensor has failed. To fix this error, you must replace the thermal fuse. Additionally, the cooking basket should be at least 15 cm away from the wall. The following instructions may help you resolve the error. You should also contact GoWISE’s customer support team, if you have one. If you are unable to contact GoWISE, you can download the model’s manual online.

Another possible cause of this error code is a broken sensor. While you’re trying to diagnose this problem, you may notice that your air fryer is stuck in cleaning mode. You can try resetting the air fryer by unplugging it. However, if the problem persists, you should contact GoWise support and follow the steps to fix the issue. However, you should note that the code will vary from brand to brand.

In case the air fryer is plugged into the right outlet, it’s important to check the circuit breaker. If this doesn’t work, you should try to replace the faulty PCB. If this fails, you should contact the manufacturer for assistance. If the problem persists, you may also want to check the power cord for loose ends or damages. Also, be sure to connect the power cord to the correct outlet.

Thermal sensor failure

The E1 error code may indicate that the thermal sensor in your GoWise air fryer is failing. This error can also occur when the power supply is damaged. To resolve this problem, you should first check the sensor and power supply. If both components are okay, you should be able to continue cooking. If neither of these solutions work, contact GoWise support. After checking these two possibilities, you should be able to resolve the E1 error code in your air fryer.

Another possibility for this error code is a broken circuit or loose parts inside the air fryer. If this is the case, contact GoWISE customer service and ask them to perform a health check. The customer support team can provide further assistance in troubleshooting your air fryer. You can also try downloading the user manual from the manufacturer’s website. You should carefully follow the directions included in the manual to repair the error code.

The manufacturer’s warranty covers any defects in materials and workmanship for one year. The warranty does not apply to unauthorized adjustments or commercial use. The warranty is only valid for the first owner and does not cover subsequent owners. Also, GoWISE USA cannot be held responsible for unauthorized alterations to the air fryer or for misuse of the product. You must follow the instructions carefully to avoid the risk of damage.