How to Fix the E20 Error on Washing Machine

If you want to fix the E20 error on your washing machine, you have to try to identify the exact cause of the error. In some cases, it could be due to a clogged drain pump, filter, hose, or standpipe. In those cases, it will be best to take the washer to a repair shop.

clogged drain filter

There are a few ways to deal with a clogged drain filter in a washing machine. You can first remove the drain hose from the machine and inspect it. You can look for small toys or articles of clothing that may have been sucked into the drain hose. Alternatively, you can use a screwdriver to unplug the drain pump.

If you can’t see the drain hose, turn off the power and disconnect the hot and cold water connections. Next, check the drain hose from the washing machine to the exterior drainpipe. If the hose is bent or kinked, it may be clogged. If it is, straighten it to make it flow freely.

If you have removed the drain hose and still can’t see any obstruction, blowing through it with a hose blower will reveal the obstruction. If you don’t see any obstruction in the hose, then the issue is most likely with the pump. A worn or badly kinked drain hose can interfere with the pump and prevent it from functioning properly. Replacing the drain hose will improve the pump’s performance.

clogged drain pump

If you are having trouble with the drain pump on your washing machine, you may need to unclog the drain hose. To do so, disconnect the hose from the washing machine and washbasin. Remove the clogged item and use needle-nose pliers to pull it out. In some cases, the clog may be located inside the drain hose, which can be unclamped and shook to remove it.

Usually, the drain pump is located at the bottom of the washing machine, in a transparent housing. If you notice a sock stuck in the pump, try removing it with a needle-nose pliers. If this does not solve the problem, you might need to replace the pump. If the pump is driving water to the drain, the belt that drives the pump could have snapped.

When your washing machine is not draining water properly, there could be a number of issues causing it to clog. You should try to clear the clog as soon as possible. Alternatively, you may need to contact a repair service to have your washing machine fixed. In most cases, clearing the clog will resolve the problem.

clogged drain hose

If you’ve been unable to drain the water from your washing machine, you may want to take the hose off and check it for kinks and twists. You can easily remove the drain hose by unscrewing the clamp at the back. If you notice any standing water, use a plumber’s snake to feel for the blockage.

Once you have located the blockage, it’s time to try to fix the hose. Pull out the hose carefully to avoid causing damage to it. The hose may have become clogged with gathered fibers. Once it’s free, reconnect the hose and try running the washing machine again.

You can also remove the clog yourself by unplugging the washing machine. Depending on your washing machine, you may have to disassemble it or replace a portion of it. In either case, you’ll need some supplies and tools. A bucket, towels, hose clamps, screwdrivers, and pliers are helpful. If you need a second pair of hands, you can ask a friend to help you remove the clog.

clogged standpipe

If the standpipe of your washing machine is clogged, you may have to drain water from the machine manually. If this does not work, you may need a plumber to repair the problem. Before trying to solve the problem, you should unplug your washing machine. This will give you more room to work around the back of the machine. Afterwards, remove the hose from the standpipe. Check for any kinks or twists in the hose. You can also try to poke the blockage with a straightened coat hanger.

If you cannot see any debris, you can try using a small drain hose or a power drain snake. These devices can help you clear clogged standpipes and are very helpful when it comes to washing machines. However, if your washer is not draining the water properly, you may have to use a medium-sized drain snake in order to unclog it.

When your washing machine’s standpipe becomes clogged, water won’t drain properly and can overflow. This is a common problem, but it doesn’t have to be a difficult task. You just have to be able to locate and clear out the clog. If you don’t have a hose, you can always use a garden hose to unclog the pipe.