If your maytag washer has been displaying the same error code for several cycles, you may be experiencing drain problems. You should check to make sure the hose is not kinked or disconnected. If it is, you may need to replace the main electronic control unit. Here are the most common reasons why you might see this error code. If none of these situations apply, contact a technician to perform a thorough check. Weigh your options carefully before making a decision.
One of the most common Maytag washer error codes is 4E. This error indicates that the machine does not detect the detergent cartridge in the dispenser. Sometimes, the problem could be as simple as not having enough water in the plumbing or a foreign object stuck in the filling valve. Sometimes, the problem may be as simple as improperly connecting the cold and hot water hoses. If any of these situations occur, call a professional for assistance.
Another reason for the Maytag washer error code is that the lid has been left unlocked. The lid will not open after 6 minutes and it may lock itself up. Similarly, the machine will not drain the excess water and may lock itself. This could be a problem with the main water supply, or it could be the drum. If this is the case, call a technician to replace the part. In many cases, replacing the lid may fix the problem.
Another reason for this error is that there is something in the load. The lid may have become jammed with items. Heavy items might have fallen on top of the washer and prevented the lid from unlocking. To clear the code, press the POWER/CANCEL button on the control panel. Otherwise, press START/PAUSE to start the cycle again. If the issue persists, you may have a problem with the lid lock mechanism.
Excess suds is another common cause of this error code. This problem can cause your machine to stop spinning or extend the time it takes to dry the items. Suds are caused by several reasons, including improper use of high-efficiency detergent, improperly inserted or closed detergent cartridges, and improperly maintained door and dispenser seal. If the suds are excessive, it may be a sign that the detergent cartridge is not working properly.
If the drain hose or hot water faucet isn’t working properly, it is likely that the heating element in your Maytag washer is faulty. If this is the case, you may need to replace the heating element or get a new one. If you can’t find the issue, contact a Maytag technician to come and inspect your machine. You can also try a self-diagnostic procedure to resolve your Maytag washer error code.