ND Error Code in Samsung Washer
If you are experiencing ND error code in Samsung washer, here’s what you should do to solve it. The problem is probably in the drain pump component. It can become blocked and needs cleaning or adjustment. Alternatively, it could be a faulty drain pump. The latter is much more difficult to repair or replace, but it may still be worth a try. To clear the error, follow the steps below.
You must first unplug the washer to access the diagnostic mode. Once you enter the diagnostic mode, the Samsung washer will play a chime to indicate that the diagnostic mode is complete. The dial will then scroll through the current error codes. After the diagnostic mode ends, you should see the letter ‘D’ in the screen. This is the last error code. The washing machine will be able to wash clothes again.
If the “Nd” error is accompanied by no water flow, the drain hose may be backed up. The filter may be clogged with debris. If the hose is inserted too far into the drain pipe, the syphon effect will prevent water from draining out of the washing machine. Once this has been resolved, you can continue to use your Samsung washer. If it’s still showing an error code, contact your appliance repair shop as soon as possible to avoid further damage to your machine.
If you’re still having problems with the washing machine, you can check for a faulty thermistor. This component is located on the main PCB control board. If you’re unable to fix the problem after repairing the thermistor, you should consider replacing the main PCB control board. If the temperature sensor is faulty, you should try unplugging the washing machine and running it in a small load to verify if the problem has been solved.
If you’re experiencing ND error code in a Samsung washer, there are several things you can check to resolve the problem. First, check the drain pump. If it’s clogged or not working properly, you’ll have to drain the machine. If the drain pump isn’t working, the water draining from the washer won’t drain properly, resulting in wet clothes. If it is working, you’ll hear a labouring sound. If it is, then you can drain the washer and inspect the pump.
If you’ve tried removing the drain hose and drain the water from the machine, you may need to clean the filter. Unplug the machine and remove the access panel to reach the drain pump. Place a digital multimeter on the power terminals of the drain pump and test the voltage of the machine. If the problem persists, call a technician to assist you. When you’ve tried everything, the ND error code in Samsung washer will likely disappear.
