Canon Mg3520 Error Code 5B02 – How to Fix Canon Mg3520 Error Code 5B02

Are you looking for the solution to the canon Mg3520 error code? Do you know what causes this error code? This article will explain how to fix this problem so you can enjoy the benefits of your Canon printer. By following these steps, you should be able to fix the error in no time. Listed below are a few causes of the error 5b02.

First, the ink system needs to be flushed. This should be done when the ink tank is full. If you’ve been experiencing this error repeatedly, you may need to replace the ink absorber. If you’ve tried all these things without success, you can try hard reset or resetting the internal memory. Alternatively, you can also try cleaning the cartridge. If all else fails, you can contact the Canon customer service.

Another cause of the Canon Mg3520 error code 5B02 is a faulty cartridge. A bad cartridge could be blocking the printheads. A damper absorber could also be causing this issue. In any case, it’s imperative to address the problem as soon as possible to prevent the printer from functioning. This simple procedure should solve the problem in the majority of cases. Alternatively, you can take your Canon Mg3520 to a Canon dealer for repair.

There are a few things you should check if your Canon printer is displaying the error code 5B02. Make sure that your printer is powered on, connected to your computer with Wi-Fi and that there’s enough paper loaded. Also, make sure there are no paper jams, as these can cause the error. Ultimately, you can’t do much about the error code until you get it fixed.

Another way to fix this Canon error code is to reset your printer. To do this, you must unplug the power cord and open the cartridge access door. Press the power button for five seconds until the printer restarts. If this doesn’t work, contact a Canon tech support agent for a step-by-step guide on how to fix the issue. You may need to repeat this procedure if the first method didn’t work for you.

This Canon printer error code is caused by a clogged ink absorber. When this happens, the printer cannot print. As soon as the ink absorber fills up, the printer won’t work again. Remove the ink absorber covers from the printer and clean them with warm soapy water and rubber gloves. It may be a good idea to read the user manual first before starting this repair.