How to Fix Kenmore Elite Washer Error Codes

If your Kenmore Elite washer is giving you an error code, there are several things you can do to fix the problem. First, check the connection between the air hose and the water level pressure switch. If the air hose is properly connected, the water level pressure switch should also be working properly. If not, you may need to replace the shifter assembly. In some cases, a defective water level pressure switch can cause this error code.

If you receive an “unbalanced load” error message, you should re-distribute your load. You can do this by closing the lid and restarting the cycle. If the error message persists, you may need to call the manufacturer’s customer service department for assistance. If you don’t get an answer within an hour, you can try pressing the STOP/CANCEL button several times.

Another common problem with the drive motor of a Kenmore Elite Front Load Washer is that it fails to detect its speed. If this happens, the door will lock. To check whether this is the case, remove the back panel of the machine and check the wiring harness. If there is any resistance in the motor windings, it is probably the cause of the problem. If you notice any resistance, you should check the drive motor.

To fix a Kenmore washer that has an error code, you need to first check the drain hose, pump, and pressure switch. If you don’t see these components, you can try to replace them. Another way to solve the problem is to check the Central Control Unit (CCU). A malfunction in the CCU can lead to further breakdowns. If you’re unsure of which component is causing the error, contact a reputable technician or appliance repair company.

If you’ve tried the diagnostic mode without success, it may be time to replace the drive motor. If it is, you should replace the lower machine harness as well. Also, check the wire harnesses for strong connection and the drive motor for worn or damaged parts. If all of these steps fail, you need to replace the machine/motor control assembly. If you still have the error, follow these simple steps to resolve it.

If the diagnostic mode doesn’t work, you can use the manual. To use it, you need to hold the Pause/Cancel button and the Options button simultaneously. The LED display will spin rapidly. Then, turn off the control and unplug the machine. You can now try to troubleshoot the LE error code. After all, it is just a matter of patience! This way, you’ll be able to fix your Kenmore Elite washer and restore it to its peak performance.

If the temperature of your Kenmore washer is high, you should try draining the water. You should also check the water level in the drum. You can also check the drain hose. Make sure the water supply hose is connected to the water socket. If the problem persists, you may need to replace the control board. If the error is not fixed, you can try the following tips. So what are you waiting for? Get the right solution today!

Asim Boss

Muhammad Asim is a Professional Blogger, Writer, SEO Expert. With over 5 years of experience, he handles clients globally & also educates others with different digital marketing tactics.

Asim Boss has 3419 posts and counting. See all posts by Asim Boss