Whirlpool Washer Error Codes
A whirlpool washer error code means that something isn’t right with your machine. If this happens to you, follow these steps to resolve the problem. First, check the motor rotor position sensor (RPS) thermistor. If it’s malfunctioning, open the valves and remove any obstructions from the hoses. Make sure that the anti-flood hose isn’t attached to the washing machine’s waterline. If this does not fix the problem, you can press the power button to clear the error.
If this error code happens more often, the motor control board is probably at fault. If this is the case, it will need to be replaced. Alternatively, the user interface can be checked. If it is functioning properly, the connections to the main control board can also be checked with a multimeter. If they aren’t, you will need to replace the unit. This procedure may also help you diagnose other problems with your washer.
The F7 E1 error code is related to the motor speed. When your washer is running, the motor needs to work at a certain speed to spin the spinning drum. This is critical as the motor speed will vary from cycle to cycle. If your washing machine keeps displaying this error, it might be due to something as simple as a loose bolt or too much laundry. In this case, reducing the load to one third of its size will usually solve the problem.
When suds lock occurs, there is a power glitch in the motor. If this error occurs, the motor control unit senses the condition and shuts off the pump. Suds lock is caused by a problem with the pump or extra heavy loads. The drain hose may also be clogged or blocked. You can clear the problem by examining the hose or pipe. If the drain pump is not blocked, you can try pressing down on the control lock.
If the suds clogs, inspect the drain hose to ensure it’s installed properly. Also, check the detergent. Make sure it’s HE and not regular. If this is the case, use a high-efficiency detergent. Before purchasing detergent, read the label carefully, as not all brands are designed for this type of machine. Avoid using detergent that contains liquid chlorine bleach because it could increase the amount of suds.
Another common error code is E1FI. This code indicates that there’s a problem with the CCU. This error can be caused by a damaged power plug, loose power cord, or a loose power cord. Damage to the power cord can disrupt the electrical transmission and interfere with the ACU’s functioning. The CCU is the brain of your washer, and contains many components. If you don’t see it, check the CCU’s wiring connections, as the connection could be loose and cause a slight imbalance in the power supply to the ACU.
If these steps don’t fix the problem, contact a qualified Whirlpool washer technician. These technicians can help you identify the problem and suggest the best course of action to fix the problem. It is important to note that a Whirlpool washer error code doesn’t mean that your machine is broken. Usually, these issues are easily fixed. You can also use the error code to diagnose what is wrong with your machine.
