If you have an LG washer and you are getting the LE error code, there are some things you can do to fix the problem. Usually, this error message means that there is a problem with the motor, which is the reason for the error. If you notice this error on your LG washer, you can disconnect the power and then replace the hall sensor and rotor to resolve the problem. However, if you cannot fix the issue on your own, contact a professional LG repairman.
If you still cannot solve the problem, you can always try resetting your LG washer. To do this, disconnect it and then tap the power and start buttons for five seconds. You may also have to replace the door seal, which is another potential cause of the error. If all else fails, try changing the door lock or the latch. You may also need to replace the lock or the latch in the hatch. To reset your LG washer, follow these simple steps.
First, turn the power off at the circuit breaker or the wall. Hold down the Start/Pause button for at least five seconds to clear the error code. Next, make sure the washing machine is not overloaded. Overloading it can cause the LE error code to appear, and you may end up with a more serious problem. If the error code continues, you may need to contact a service technician for a repair.
The rotor position sensor is the primary cause of the LE error. This part monitors the motor and communicates with the control board. The hall sensor can be a cheap individual part, but it may not be possible to replace it without replacing the entire stator. In that case, you will need to replace the entire motor as well. This should solve your LE error in LG washer. You can use this solution to fix the error.
If the problem persists, you should try to clean the pump filter. LG recommends cleaning the pump filter monthly to prevent odors, mold, and mildew. You should also check the drain hose. If it does not drain, you may have a problem with the water hose. To remove the pump filter, use pliers to release the clamps on the drain hose. If this still does not fix the issue, you should replace the pump.
Another cause for le error code in LG washer is a large load. It may be straining the motor. It may be necessary to remove the items and let the machine cool down to prevent further damage. The rotor, which is a metal turntable, can also be a cause of this error. Typically, when the washer is spinning clothes, it makes a noise. Sometimes this noise is a dull thumping or a loud banging sound.
Another possible cause of LE error code in LG washer is excessive sudsing. High-efficiency detergents usually produce excessive suds. To prevent excessive sudsing, you can follow the detergent instructions and use a different brand. You can also try turning off the washer for a while to allow the suds to dissolve and then run a drain cycle. If that does not solve the problem, you can also try unplugging the washer so that the suds are removed.